Total L.17.5-Inch/Rod L.12-Inch 3000-Grit Ceramic Sharpening Steel with Built-In Angle Guides and Anti-Breaking Cap, Sharpening Rod, Knife Steel, Ceramic Honing rod, Chaira Afilador Cuchillos

A simple work sharp precision adjust as only 80$ at Walmart. 320 and 600 grit diamond stones plus a fine ceramic. Not only will you get a perfect edge but you won’t break the bank! If you want to go freehand route then be prepared to spend well over 100 dollars. Most of use spend more than that on a single stone! With that being said Cheefercut sells a double sided vitrified diamond stones (400/100 grit) for around 100$. Also if you want an excellent 1 and done stone THELITE sells a 1000 grit vitrified diamond stones plus a strop for 100$. It cuts fast and leaves and excellent edge. However if it’s your first time freehand can be frustrating until you get that hang of it, probably 20 or more knives in before you find your groove and start getting quality results. Cheapest route would be a double sided diamond plate from Sharpal. It will still get you good results but deburring can be tricky without a ceramic rod and strop. Budget option below https://a.co/d/04XvFUdS https://a.co/d/081hLUCi https://a.co/d/0gyCqfWc