INJORA 1.55" Silicone Rubber Insert Foam for 95-97mm Tires(Green)

The Bushido 12 doesnt have a ton to do due to lack of aftermarket support but ive done the following to mine which make it somewhat better: AGFRC 10kg servo is a direct fit.https://a.co/d/0eA0azxJ GPM Reduction Gear for the Thunder Tiger Kaiser XS. Goes into the transmission top shaft and reduces the gear ratio significantly. (please note they have the lower trans gear also but it doesnt fit with the stock driveshafts)https://www.gpmparts.com/gpm-skxs12t33t-precision-steel-45-double-speed-reduction-gears-p-90079982.html Hobbywing Fusion 16 instead of the stock electronics and my own TX/RX(Radiolink rc6gs). Turns it into a very linear rate throttle application with plenty of speed. Perfect upgrade, use stock pinion.https://www.amainhobbies.com/hobbywing-quicrun-mini16-fusion-370-2in1-brushless-esc-motor-system-hwa30120403/p1582473 Element 1.55 Beadlocks + Element Brass Hubs + Element 1.55 General AT-X tires w/ Injora Super Soft Green Silicone Inserts:https://www.amainhobbies.com/element-rc-urbine-1.55-wheels-black-asc42112/p1353330https://www.amainhobbies.com/element-rc-factory-team-enduro-brass-beadlock-hex-adapters-4-asc42104/p977618https://www.amainhobbies.com/element-rc-general-grabber-a-t-x-1.55-tires-2-asc42107/p1057783https://a.co/d/05jA0pCD Turns the truck from ok to GREAT. I also removed the stock battery tray for the base plate with a velcro strap to run everything from an 3s 850mah to a 3s 2200mah. Truck will run for HOURS on a 2s 3300mah lipo battery.