VOISEN 2 LBS Orange Indicating Silica Gel Desiccant Beads,Reusable Desiccant Industry Standard 3-5 mm,Desiccant for 3D Printer,Electronic,Clothes,Painting,Jewelry

Yes; use more silica gel/desiccant. Specifically the beads from a container instead of in packets. Here's one that I just bought https://a.co/d/0hPrMfNj Clear out the old ones you've put in there as they've probably already absorbed a lot of moisture. You can easily print an enclosure(s) for it so that it can be placed inside the AMS. https://makerworld.com/models/545051?appSharePlatform=copy

Maybe try reusable silica beads to save some money since it's probably going to be an ongoing issue.

My house is typically 50 to 60% RH. In order to reduce or remove a factor that can make a print bad, I always dry my filament and keep it in a cereal box. Here is what I do. Note that there a bunch of options in the cereal box category - choose something that works for you. I use this food dehydrator to dry my filament: https://amazon.com/Elite-Gourmet-Dehydrator-BPA-Free-Stackable/dp/B08BSQZ2LS/ I printed 4 of the "285mm x 180mm x 90DEG" models to be able to dehydrate 2 spools at once: https://www.printables.com/model/344695-parametric-dehydrator-filament-dryer-up-to-10-x-1k I bought these to store the filament after it is dried or between printing: https://www.amazon.com/dp/B0BHVT9PV1 These for monitoring the humidity in the box: https://www.amazon.com/dp/B0DG8ZXZ5D This for keeping the spools dry in the container: https://www.amazon.com/dp/B0F6L7PS6X Print these for holding the silica, spool and hygrometer: https://makerworld.com/en/models/820876-modular-filament-storage-for-dry-box-desiccant-box

Thank you! I too live in the south so when I'm able to get an ioniq 5 I'll use this trick too in the hope it works. Those dessicants work well but ive had them spill and it's a real mess. Here's a link to some silica gel that I don't think absorbs as much humidity but is reusable by microwaving the moisture out and doesn't turn liquid if you're interested. https://a.co/d/0cBsEfhj

I suppose it might depend on what you mean by good. If you live in a place with little humidity, then sure. However, you should still dry your filament before using it. After that, you need to keep it dry. I'm not saying this is what you need to do but consider the concepts. I use this food dehydrator to dry my filament: https://amazon.com/Elite-Gourmet-Dehydrator-BPA-Free-Stackable/dp/B08BSQZ2LS/ I printed 4 of the "285mm x 180mm x 90DEG" models to be able to dehydrate 2 spools at once: https://www.printables.com/model/344695-parametric-dehydrator-filament-dryer-up-to-10-x-1k I bought these to store the filament after it is dried or between printing: https://www.amazon.com/dp/B0BHVT9PV1 These for monitoring the humidity in the box: https://www.amazon.com/dp/B0DG8ZXZ5D This for keeping the spools dry in the container: https://www.amazon.com/dp/B0F6L7PS6X Print these for holding the silica, spool and hygrometer: https://makerworld.com/en/models/820876-modular-filament-storage-for-dry-box-desiccant-box

I use this food dehydrator to dry my filament: https://amazon.com/Elite-Gourmet-Dehydrator-BPA-Free-Stackable/dp/B08BSQZ2LS/ I printed 4 of the "285mm x 180mm x 90DEG" models to be able to dehydrate 2 spools at once but you could do up to 10: https://www.printables.com/model/344695-parametric-dehydrator-filament-dryer-up-to-10-x-1k I bought these to store the filament after it is dried or between printing. There are a large number of cereal box solutions that include the ability to print from the box. I have many more than 6 spools dried and ready. https://www.amazon.com/dp/B0BHVT9PV1 These for monitoring the humidity in the box: https://www.amazon.com/dp/B0DG8ZXZ5D This for keeping the spools dry in the container: https://www.amazon.com/dp/B0F6L7PS6X Print these for holding the silica, spool and hygrometer: https://makerworld.com/en/models/820876-modular-filament-storage-for-dry-box-desiccant-box