Gomake Emblem Removal Tool Vinyl Wraps Car Surface Logo Plate Line Remover Tool for Car Wrapping Film Installation

Gomake Emblem Removal Tool Vinyl Wraps Car Surface Logo Plate Line Remover Tool for Car Wrapping Film Installation

comments:

bandersnatchpop posted on r/kiasportage3w

There were a couple of general (non Sportage specific) YouTube tutorials I watched to get an idea of what to do, its a straight forward process but I'll see if I can link one I watched below. But what none of them told me was that on the Sportage specifically the front badge has keyed pegs that slot into holes in the hood, so if you want to do a straight up delete with no badge you will have two significantly sized holes to contend with so keep that in mind. This also slightly complicates removal as you cannot just slice through the adhesive like you can with the rear emblems, you have to work your way around the pegs. For the removal you'll need 5 things: A removal tool this is the one I used the string broke a few times but it got the job done. A heat gun/hairdryer Goo gone (I used the automotive formula but any should work) Microfiber cloths Painter's tape Here's one of the tutorials I watched to give you an idea of the process. This is not where I sourced my emblems from.

Gomake Emblem Removal Tool Vinyl Wraps Car Surface Logo Plate Line Remover Tool for Car Wrapping Film Installation | eaves-shop