comments:
If you want something you can do without soldering, try these toggle switches from Amazon that have screw terminal. https://www.amazon.com/Toggle-Switch-Pin-Marine-Waterproof/dp/B0DD47KFVC/ref=sr_1_2_sspa?crid=C2EQQFVYJ5UE&dib=eyJ2IjoiMSJ9.HRGmMLFAZzZxYvC92ryRQ-YPGtr-UjeiT3Odl7NyGyMEG0ok8VsuxB2Htj4QcEfu5uxbOn9BOM4uA_PVFAb8WnqjOxrgIWH1usklmjYtCMw-0WDh27hj9PK7bh8byZgQMIojunn1GLzOdxOkKJojlyAiRv29TRrTR3d41QxqE5Mr5Z5HRYcRi9fr0NzkeNDpaL_FLtss00y4UM3yjRV64R0SUwLsTi1rqjB14zDw9bE.wkJsJbWUWPDIi0ralQ2aiUD4kGLu34nytd0cGqlgY7Q&dib_tag=se&keywords=DPDT%2BToggle%2Bswitch%2Bwith%2Bscrew%2Bterminals&qid=1779948437&sprefix=dpdt%2Btoggle%2Bswitch%2Bwith%2Bscrew%2Bterminals%2Caps%2C152&sr=8-2-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1 Cut the motor wires and hook to the two center terminals. Cut the battery wires and hook to two terminals on one end, blue on the same side as the motor black wire. Flip the switch handle toward the other end and it should run. if you really want to be a hero, run a wire from where the blue wire is connected to the screw terminal on the other end on the side where the red wire is connected. Then do the same for the battery red wire to the other end on the side with the black motor wire - should look like an X across the bottom of the switch. Now the motor should run in opposite directions depending a which way you throw the switch - center is off. You can also get solder versions of the switch, or if you want just on and off, get a switch with just two terminals (look for SPST switch) and connect the two red wires to it and just connect the two blue and black wires together. Hood this is useful.