comments:
Cannatrol / Shelves / Hang Colas / DIY hackHey everyone - has anyone DIY'ed a shelf? Like a lot of you, one of my biggest gripes with the Cannatrol is putting fat, beautiful colas flat on the solid shelves and getting those annoying flat spots, or having to constantly flip them. It's not a big gripe considering the end products have been FIRE I came up with a super clean, minimal DIY fix using pieces from a "Tosnail 2 Pack Stainless Steel Clip and Drip Hangers" set (https://a.co/d/0dcy6jky), which you can find cheap on Amazon (which i bought when I was OG drying/curing). These are the laundry accessory style hangers with individual metal clips. I took ten of the individual clips off the hanger, easily removed the clips to then thread the small wire loop of each clip directly down through the circular perforations in the Cannatrol shelf. Then i easily reattached the clips. I spaced the ten clips out equidistant across the shelf so the weight is evenly balanced. The max length of a cola is about 15". This seems that it'll work incredibly well because the colas would hang completely suspended in mid-air. There is absolutely no squishing, and zero manual rotating is required. By spacing out exactly ten clips, the air circulates perfectly around every single bud. Plus, because you aren't using a big bulky rack frame, you aren't blocking the remaining air holes in the shelf. Any thoughts? Hope this helps someone out on their next harvest!