BTF-LIGHTING 5 PCS JST SM 3PIN V Shape 1 to 2 Connectors for 3 Pin SMD WS2812B WS2811 WS2812 WS2814 SK6812 FCOB WS2811 IC Addressable LED Strip Female Male 15CM 22AWG Wire

Edit: just reread your comment... Yes they will fit lol. https://a.co/d/06r2F32l https://a.co/d/0fSAQhwq https://a.co/d/0f1YL3YC https://focusattack.com/power-passthrough-harness-for-fa-so-cd-hori/ Used these strips here specifically to fit the sides, two of them actually. Had to use a splitter too. If you're just looking to illuminate the buttons, any led strips will work. I taped mine down so it's not just all dangly. If you're looking to fit the sides be aware you don't need to trim down plastic but to get both sides to illuminate the same you will need to. I would attach a photo of what I'm talking about but I'm not home right now. It's a tiny lip right next to the touch screen pcb that sorta blocks the lights and doesn't let it shine well. It will shine but it looks dull compared to the left if not done. Good luck!

No, the corners on mine are all right angles. I got two of these. Then I got two of the BTF CCT controllers (two-pack with the remote, one for each cabinet) and I wired them to these connectors - Green into Warm White, White into Cold White (although I tried the other way and that worked too) and Red into the inner V+ terminal. Then I got these splitters so I could connect both the top and bottom LEDs into a single controller. As for the power supply, I used the one that came with the cabinets. I simply unplugged them from the built in controller and plugged them into the BTFs. Remote was pretty easy to pair, and the wireless gateway wasn't hard either once I figured it out. I have the occasional glitch where it will randomly switch to cold white or default to it when I turn it on or randomly switch, but for the most part it works great.