comments:
you can also try this tool https://www.amazon.com/Printer-Accessories-Piercing-Cleaning-Removable/dp/B0DJVYW69N/ref=sr_1_21_sspa?crid=259Y5EHSBQNCN&dib=eyJ2IjoiMSJ9.tXW-c1cAvg33DZNcYRM_yxuln1J8ICQjLiUKW9Jao_F9oYpK5HQG3hx3dv_XxnSjYu5VyjQN69qiDoEZcnpQ6yhqnJKnoh1qyx5HVt8N5OG5LD2sOJ2aDhKd1VknOozWvZt31hwvovA1sQe-MHHup8DXsXs_H_Om7bcj0kbg_AQjG4BVAYhm_jFyKXSw9nkUHNQ9eI8T3BIP32nH6UnTqQ.cCMq-GQyj12FmcGoYigpMRnr71CnSEpl2EBirAkz-60&dib_tag=se&keywords=3d+print+head+cleaning+kit&qid=1781507093&sprefix=3d+print+head+clean%2Caps%2C259&xpid=QqRF2VsB1qNsv&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1
Get this one instead. That little metal piece of shit is more likely to scratch the inside throat of your heartbreak and bends too easily. This one is awesome and you can actually push through jams easily. https://www.amazon.com/dp/B0DJVYW69N
Crank it up to as high as your nozzle will go and then use a poker from the top down and push it out. I like this one as it's pretty solid compared to the thin bendy wire ones. https://www.amazon.com/dp/B0DJVYW69N?ref=ppx_pop_mob_ap_share I've only had one nozzle this didn't work with
If it’s truly blocked, Get one of these: Clog Poke 3D Printer Accessories,... https://www.amazon.com/dp/B0DJVYW69N?ref=ppx_pop_mob_ap_share
Bro do yourself a favor and pick up a $12 nozzle unclogging tool on Amazon. I bought one a couple weeks ago to clear out a 0.2mm nozzle that I attempted to unclog for hours using normal methods like cold pulls and heating up the nozzle. With the tool, I heated the nozzle to 270, stuck the tool down through the extruder and into the nozzle from the top and it legit INSTANTLY unclogged it and all the filament came out. This is the one I bought: Clog Poke 3D Printer Accessories https://www.amazon.com/dp/B0DJVYW69N?ref=ppx_pop_mob_ap_share