FPV UBEC Micro 5V 3A / 12V 2A UBEC Adjustable BEC UBEC 2-6S for Quadcopter RC Drone(3PCS)

FPV UBEC Micro 5V 3A / 12V 2A UBEC Adjustable BEC UBEC 2-6S for Quadcopter RC Drone(3PCS)

comments:

Retb14 posted on r/rocketry3w

Get an FPV camera You can get both a transmitter for live video if you want it or just store it on an internal SD card (or both) They are stand alone systems and are pretty small and light They are also stupid strong. I smashed one directly into a metal pole going a but over 60mph and the only thing that broke was the lens. Fixed with a $2-3 part The cameras are easily swappable if you want a different lens or for different situations (they just plug and play) https://shop.runcam.com/runcam-mini-fpv-dvr/ This is a DVR, you'll need to solder the camera wires to this one but it's 3.5g and about $20 It takes micro SD cards You can search up FPV analog camera and pretty much any of them will work You'll also need a battery with it and I would recommend a BEC https://www.amazon.com/FPVKing-Micro-Adjustable-Quadcopter-Drone/dp/B07PLSYX9G/ Here's a set of 3 from Amazon for about $15 From there you can decide how big of a battery you want. I would say probably a small 2-3 cell battery since you don't need a long recording time and smaller batteries are cheaper so you can get multiple and just plug a new one in when you launch If you want to be fancy you could have a safety pin to disconnect the battery from the outside then pull the pin before launch (just need two bits of metal that are forced together and a plastic pin that forces them open when you are on the ground) The whole thing will be fairly light and cheap and is pretty customizable for whatever you need. The wires to the camera also allow you to place the electronics and camera anywhere you want

FPV UBEC Micro 5V 3A / 12V 2A UBEC Adjustable BEC UBEC 2-6S for Quadcopter RC Drone(3PCS) | eaves-shop