Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread

Rain Bird HT07525PSI Drip Irrigation 25 PSI Pressure Regulator, 3/4" Female Hose Thread x 3/4" Male Hose Thread

similar products:

comments:

Sea-Influence1946 posted on r/growingmarijuana18w

Edit: Adding a bit more details here. So yes my setup is within a shower (it was the perfect drain system). Lights: 3 x SF1000 for 300W total Temperature: TCL Window AC De-Humidity: Midea 20 Pint Cube Humidity: Levoit humidifier As for my irrigation system, I developed it myself using the parts below. It is a system using a diaphragm pump connected to 3/8 hose, I filter and reduce water pressure before delivering to a 1/4 4-way manifold. From this manifold I split each line into 2 lines to the plants. - My pump is controlled by this Short/Long interval controller - Self-priming 12V pump with 80psi pressure - Powered by a 12V 150W PSu I use a regulator to reduce pressure down to 25 PSI Water gets filtered by this strainer before going into the pump - Goes through a check valve to avoid the system draining when not watering Gets delivered to the 4-way manifold - Finally I split each line again to have two hoses to each pot Mylar in the floor and walls is my next step